How to get a splinter out

 Whether you are into the great outdoors, have inquisitive children or you like to make things, chances are you’ve experienced a splinter in your finger, foot, or hand at least once in your lifetime. If you are anything at all like me, there’s been times when you weren’t even sure how you managed to get a splinter in the first place.

As splinters are generally a bit painful, and if left untreated, can become infected, we want to remove them as soon as we become aware that we have one. There are a few techniques we can use to ensure the splinter comes out simply and cleanly.

Hygiene Preparation for Splinter Removal

Regardless of the method you use to remove the splinter, you’ll first want to:

  • Clean the affected area and your hands, preferably with soap and water, but if you aren’t close to a handbasin, antiseptic wipes are a good alternative.
  • Gently pat the area dry with a clean towel
  • Inspect the splinter so you can better understand what the best way to remove it will be


Removing a splinter

Based on what you observed when you inspected the splinter, these are the best ways to get a splinter out:You can see the splinter is sticking out of the skin

When you can see that the splinter is sticking out of the skin, tweezers are likely to be your best way to get the splinter out. Begin by wiping the tweezers with an antiseptic wipe to sterilise them.

You then want to pull the splinter gently in the same direction that it entered the skin.

Be very careful not to squeeze too hard as splinters are often fragile and pulling or squeezing too hard can cause it to fracture into smaller pieces that are much harder to remove.

We like to use a tweezer with a wider edge as we find it is easier to grab onto the splinter than when a pointy edged tweezer is used.

The splinter is completely under the skin

Embedded splinters needa small needle to safely remove them. We recommend splinter probes for this purpose as they are sterile for single use.

If your eye sight isn’t what it used to be and/or the lighting is poor, it might be helpful to use a magnifying glass so you are better able to see what you are doing.

Use the splinter probe to gently pierce the surface of the skin at one end of the splinter. Once you have broken the surface of the skin, use the needle to carefully push out part of the splinter.

Sometimes you can remove the splinter all the way like this, other times it is easier to use the tweezers to gently pull out the splinter once its head is exposed.

When to seek medical assistance

Thankfully, the majority of splinters can be safely removed at home, but some require medical assistance. We recommend you seek medical attention from a doctor if your splinter is

  • Close to or in your eye
  • the splinter is very large
  • the splinter is very deep
  • the area becomes infected
  • the splinter is lodged under a fingernail or a toenail

Will splinters come out on their own?

Our bodies will naturally try to expel a foreign body like a splinter. However, not before they cause an inflammatory response which can often be painful, and can sometimes lead to further complications. For this reason, we recommend you remove all splinters as soon as you become aware of them.

Source: splinter

Tags: fire blanket nz, first aid supplies, finger cots nz, industrial first aid supplies, dts nz, instant ice packs, eyebath


Comments

Post a Comment

Popular posts from this blog

Product Spotlight – Saline Solution

  Saline Solution, otherwise known as physiological saline, isotonic saline or simply saline is a mix of water and salt (sodium chloride). It can be used to clean and flush out cuts, grazes, and eyes in first aid scenarios. Saline is generally preferred over soaps and other cleansers because it is free from chemicals and other additives that could otherwise burn or irritate the contaminated and/or wounded area. We offer a variety of sizes in our saline solution range: 15ml  and  30ml  saline bottles are perfect for vehicle kits and other first aid kits where the risk of serious wound or eye injury is low and space in your first aid container is limited. We can also provide these sizes in boxes of  32 x 30ml  and  50 x 15ml  if you are needing bulk quantities 100  –  500ml  bottles are useful for environments where dust and flying debris are present as they generally come with an eye applicator that allows the user to flush out the affected area. The higher the risk of dust, debris or c
Read more

Burn Treatment

  The type of burn treatment you use depends a lot on the type of burn or scald you are treating. Burns can happen in an instant, and you never know if or when it may occur. For this reason we recommend keeping some basic items in your first aid kit that can be used for a variety of burns. It is also really important that first aid is applied as soon as possible to any burns or scalds as this will help to limit the amount of damage that occurs to the skin. No matter what type of burn you are treating, there are a few things you need to do to limit the amount of damage to the skin that are common for all burns. First aid treatment for burns Stop the burning process as soon as possible. This may mean removing the person from the area (e.g. get out of the sun for sunburn), smothering flames with a  blanket  or rolling on the ground to smother the flames, or possibly even dousing the flames with water. If you are the first aider, remember to be careful not put yourself at risk of getting b
Read more

Duty to Provide First Aid

Image
Whether we like it or not, as employers, we have a duty to provide first aid facilities for our workplaces. This is outlined under Section 13 of the Health and Safety at Work (General Risk and Workplace Management) Regulations 2016 . In essence we need to ensure our workers have access to first aid facilities. The legislation isn't very prescriptive about what should be included but they very clearly state we need to take into account "relevant matters". So what does this mean? There are four things we need to consider when determining what first aid facilities are required:  the size and location of your workplace/s the number of workers at each location and their characteristics the type of work your workers do, and the types of hazards that are present the views of your workers WorkSafe tells us, that when we are trying to determine what is adequate for our workplaces, we also need to take into account the following:   first aid kit in workplace how many workers are
Read more